Our top three mesh Wi-Fi systems
2-packTri-band Wi-Fi 6E at a lower total purchase price.
Compare the whole kit: the BE65 and eero offers contain three units; the XE75 Pro offer contains two. Prices and delivery availability can change. Choose the number of nodes your home needs before comparing totals.
TP-Link Deco BE65
Our most flexible choice here for a larger connected home. Choose the less expensive two-node kit if it already meets your needs.
A good mesh system improves coverage inside the home; it does not make a slow incoming internet service faster. Start by identifying whether the problem is the internet connection, the router’s location or weak Wi-Fi in particular rooms.
Our shortlist covers three practical priorities: flexible connectivity, lower package cost and simple management. None guarantees coverage through every wall. A sensible installation matters as much as the hardware.
Compare the essentials
| System and pack | Wireless design | Ports per unit | Listed price |
|---|---|---|---|
| TP-Link Deco BE65 · 3-pack | Tri-band Wi-Fi 7 | 4 × 2.5GbE | A$835.90 |
| TP-Link Deco XE75 Pro · 2-pack | Tri-band Wi-Fi 6E | 1 × 2.5GbE + 2 × Gigabit | A$549 |
| Amazon eero 7 · 3-pack | Dual-band Wi-Fi 7 | 2 × 2.5GbE | A$649 |
These are Australian product prices before any location-specific delivery charges. The packages contain different numbers of nodes, so the lowest total does not necessarily represent the lowest price per node or the best fit.
How we chose
This is a research-based comparison of manufacturer information and current Australian listings. We have not hands-on tested these systems, measured throughput in an Australian house or independently verified advertised coverage areas.
We prioritised radio design, Ethernet connectivity, installation flexibility, management and total cost. Amazon Australia and eBay Australia were checked first. The BE65 has a verified Australian eBay offer; for the other two, we use the official Australian store and an established local retailer.
1. TP-Link Deco BE65 — 3-pack
Tri-band Wi-Fi 7 with generous multi-gigabit ports.
The BE65 is our preferred upgrade for a busy home that needs several nodes and useful wired connections. Its extra ports give you more freedom to connect computers, a television or a switch without immediately running out of sockets.
The Australian product page lists 2.4GHz, 5GHz and 6GHz radios, MLO and support for wired or wireless backhaul. These capabilities make it a flexible starting point, not a guarantee of a particular speed through your walls.
The linked offer is a new three-pack from PClive Computer Online in Victoria. Confirm the supplied hardware revision if a version-specific feature matters: TP-Link publishes several BE65 revisions. We are not treating the combined BE11000 marketing figure as a measured download speed.
Reasons to choose it
- Four 2.5GbE ports on each unit.
- Three bands provide backhaul flexibility.
- Three nodes included in this offer.
Reasons to reconsider
- More expensive than the two-node value option.
- Three units may be unnecessary in a smaller home.
- Some HomeShield functions cost extra.
Best for: Households that need multiple nodes and want more wired connectivity.
Listed price: A$835.90 for the 3-pack. Confirm the exact pack and delivered total.
2. TP-Link Deco XE75 Pro — 2-pack
Tri-band Wi-Fi 6E at a lower total purchase price.
This is the sensible starting point if two nodes will cover the rooms you use. The XE75 Pro combines 2.4GHz, 5GHz and 6GHz radios without the higher purchase price of our BE65 package.
Each unit has one 2.5GbE socket and two Gigabit sockets. The limitation is practical: if the main unit’s fast port receives your internet connection, a cable leaving through one of its other ports is limited to Gigabit. It is not the ideal foundation for multi-gigabit wired traffic throughout the home.
The official Australian store identifies this offer as a two-pack, even though its address contains an old “1-pack” fragment. Check the title and cart quantity. Choose it because the package suits your home, not because Wi-Fi 6E always beats Wi-Fi 7.
Reasons to choose it
- Lowest package price in this comparison.
- Includes a 6GHz radio.
- Three Ethernet ports per unit.
Reasons to reconsider
- Only two nodes in the checked package.
- Only one multi-gigabit port per unit.
- No Wi-Fi 7 MLO.
Best for: Buyers who need two nodes and prefer to keep the total spend down.
Listed price: A$549 for the 2-pack. Confirm the exact pack and delivered total.
3. Amazon eero 7 — 3-pack
App-led management with two fast ports per unit.
The eero 7 suits buyers who would rather manage the network through a straightforward app than spend time adjusting detailed settings. The Australian three-pack is model PA10315-73PK, listed by JB Hi-Fi with delivery and Click & Collect available.
It has two 2.5GbE ports per unit, but no 6GHz radio. That distinction matters more than the generation number when planning a wireless mesh: connected devices and the links between nodes share its two bands.
Our easy-setup recommendation reflects its app-led design, not a claim that we timed installation or tested roaming. Check the controls you need before choosing a system built around automatic management. The optional eero Plus plan adds features beyond basic networking.
Reasons to choose it
- App-led setup and network management.
- Two 2.5GbE ports per unit.
- Three nodes at a lower price than the BE65 offer.
Reasons to reconsider
- No 6GHz band.
- Two ports can be restrictive after wiring backhaul.
- Some security and parental-control features require eero Plus.
Best for: Households that prioritise simple management over extensive manual configuration.
Listed price: A$649 for the 3-pack. Confirm the exact pack and delivered total.
Do you need mesh at all?
Before buying, test the same computer near the existing router and in the problem room. Where possible, also test over Ethernet. If the wired connection is slow or unstable, contact your provider before spending money on more Wi-Fi equipment.
In a small home, moving one router into a better location may be enough. Mesh becomes more useful when rooms are separated by distance, floors or difficult walls. Make a list of the places where a reliable connection matters: the work desk, television, bedrooms and outdoor sitting area.
Wireless or Ethernet backhaul?
Backhaul is the connection between mesh units. A wireless satellite must receive a usable signal before it can help nearby devices. Putting it in the room where the existing connection has already disappeared is often the wrong starting point.
Ethernet removes that wireless link from the route between nodes. TP-Link’s setup guidance explains how to connect Decos directly or through a suitable switch. In router mode, satellites belong downstream of the main Deco; follow its diagram rather than connecting every unit independently to the equipment upstream.
Read the Deco Ethernet-backhaul guide before connecting a wired system. Firmware and operating mode can affect behaviour, so do not assume every model uses exactly the same combination of wired and wireless links.
Plan the ports before you pay. Count the internet connection, wired backhaul and every device you want to cable. A two-port node can run out of spare sockets quickly. Include any required switch in the budget.
Why a newer Wi-Fi badge is not enough
The generation number does not describe the entire network. In this shortlist, the newer eero has two radio bands while the older XE75 Pro has three. That makes a straightforward “7 beats 6E” ranking unhelpful.
Look at the complete route from a device to the internet. A fast laptop connected to a satellite still depends on the satellite’s backhaul. A high wireless link rate also cannot overcome a slower Ethernet connection elsewhere along that route.
Think of headline wireless ratings as product specifications, not promised download speeds. Your own devices, placement and traffic mix determine whether paying for more capability is worthwhile.
Choose a pack around the floor plan
Sketch the home and mark the incoming connection, existing Ethernet outlets, work areas and known weak spots. Start with the fewest nodes that appear necessary, then adjust placement before adding more.
Do not install three units close together simply because the box contains three. Equally, a two-pack is not automatically better value if you immediately need another compatible node. Compare the complete planned installation.
Leave units visible and unobstructed on suitable shelves or furniture. Test more than one position rather than treating a manufacturer’s square-metre figure as a guarantee. For a detached building or a particularly difficult property, ask a network installer about a wired access-point design before buying an expensive consumer kit.
Check the NBN connection and provider settings
NBN uses several connection technologies. Establish which one serves your address and ask your provider what equipment and settings your service requires. These mesh products should not be assumed to replace a DSL modem.
For FTTN or FTTB, confirm the required VDSL2 modem arrangement with your provider. Where a connection box supplies Ethernet, confirm how the mesh router should connect to it. Keep the provider’s instructions for authentication and any phone service before removing the existing gateway.
See NBN’s connection-technology overview. If you retain an existing router, choose the appropriate access-point or bridge arrangement for the exact equipment rather than changing settings at random.
Subscriptions and privacy
Compare the features included without a paid plan. TP-Link HomeShield and eero Plus offer additional security or family-management services, but their inclusions and prices need checking separately from the hardware.
Do not assume a paid security bundle is necessary for basic internet access, or that it replaces good account security. Use a unique administrator password, install supported firmware updates and review the permissions requested by the management app.
Before purchase, list any essential controls: guest access, scheduled pauses, content filtering, remote administration or advanced network settings. Verify each one for the exact model and operating mode. A feature available while routing may not work identically when the system is bridged.
A practical installation checklist
- Record the provider settings and photograph the existing cable connections.
- Set up the main unit and confirm internet access before adding satellites.
- Add each node using the manufacturer’s instructions, then test its intended location.
- Connect Ethernet backhaul according to the correct topology where available.
- Install updates and check the app’s link or placement guidance.
- Test a video call, streaming and everyday browsing in the rooms that matter.
- Adjust one node at a time so you can tell which change helped.
Record where the network works well and where it struggles. One large speed-test result beside the main router does not tell you whether the home office is now reliable.
Common buying mistakes
- Comparing different pack sizes: always check whether the price buys one, two or three units.
- Expecting a guaranteed floor area: construction and placement differ between homes.
- Ignoring the backhaul: the satellite’s connection is part of the performance path.
- Counting only free ports: internet and wired backhaul also consume sockets.
- Paying for features you will not use: basic browsing does not justify every premium upgrade.
- Assuming unlike systems form one mesh: check the manufacturer’s compatibility rules.
- Buying before diagnosing the fault: a provider-side problem needs a different solution.
Frequently asked questions
Which system would we buy?
Start with the XE75 Pro package if two nodes meet your needs. Choose the BE65 when the extra unit and wired flexibility justify the higher total. Consider eero when its management approach suits you best.
Will mesh increase my internet plan speed?
No. It can improve the connection between your devices and the router, but it cannot raise the speed supplied by your provider.
Does Wi-Fi 7 always include 6GHz?
No. The eero 7 is a dual-band example. Read the radio specification rather than inferring it from the generation number.
Can I use my old Wi-Fi name and password?
You can normally enter them during setup, but devices may need reconnecting if security settings or other network details differ. Keep the setup instructions handy for smart-home equipment.
Will a cable from a satellite to my PC make everything wired?
Only the PC-to-satellite link is wired. If the satellite still connects wirelessly to the main unit, that wireless backhaul remains part of the route.
Can I mix different brands?
Do not buy on that assumption. Check compatibility within the exact mesh family. Connecting another router by Ethernet is not the same thing as adding a coordinated mesh node.
Should I replace a system that already works?
Not just for a newer badge. Upgrade when you have an identifiable coverage, capacity, support or connectivity problem that the replacement addresses.
Our verdict
TP-Link Deco BE65 is our overall pick for connectivity and flexibility, Deco XE75 Pro is the value starting point, and Amazon eero 7 is the simple-management alternative.
Choose the right pack size, plan the links between nodes and compare the delivered total. Spending less on a system that meets your needs is a better result than buying unused capability.
Sources and price-check date
- TP-Link Australia: Deco BE65 specifications and hardware versions
- TP-Link Australia: Deco XE75 Pro specifications
- eero Australia: eero 7
- TP-Link: Ethernet backhaul setup
- TP-Link: HomeShield
- eero: eero Plus
- NBN: VDSL2 modems for FTTN and FTTB
- NBN: network technologies
- eBay: TP-Link Deco BE65 3-pack
- TP-Link: TP-Link Deco XE75 Pro 2-pack
- JB Hi-Fi: Amazon eero 7 3-pack
Prices and availability checked: 20 September 2026. All prices are Australian dollars. Offers, stock, hardware revisions and delivery charges can change. Confirm the exact model and pack before ordering. Published specifications are not BLD performance measurements.
Need a second opinion?
Ask Adrian before making the decision.
Tell us what you are choosing between, what matters most to you and what you have already checked.